Identify the Key Issues

This picture is the story of a classic struggle – good intentions versus misdirected attention – that’s all too common in the world of stretch wrapping. Companies see the film costs of stretch wrapping and are generally concerned with how to reduce that expense by a few percentage points. However, they fail to take into account how little it is actually saving them.

It only takes about $10 of stretch film to ship a typical truckload of pallets. However, 1/2%* of total shipments are damaged to the point of being unsalable on the way to their destinations, generating billions of dollars of losses a year.

Go after the Real Opportunity

It's better to focus on reducing shipping damage than on reducing film cost.

More time and energy are typically spent on reducing film cost than on reducing damage. This is particularly unfortunate because our experience indicates at least a quarter, if not more, of goods that become unsalable from shipping damage can be saved simply by doing a better job of stretch wrapping.

So, what constitutes “doing a better job of stretch wrapping”?

First, you need to apply enough containment force (the total squeezing pressure the film exerts on the load) to the top, middle and bottom of the load. Containment force, usually measured in pounds kilograms, is what holds the load together.

Second is locking or securing the load to the pallet. If the load isn’t locked to the pallet, then it could slide off during shipment.  Wrapping a load all the way to the bottom of the pallet leaves the load vulnerable to film punctures as the load is moved by forklift or pallet jack. The way to address this is to lock the load to the pallet by rolling up the bottom of the film into a cable. Then the cable is driven down on the pallet about an inch below the deck boards so it’s safely out of the way of the forks on pallet jacks or forklifts.

Additionally, avoiding dragging film tails is key for securing the load to the pallet. Dragging film tails can get caught, pulled, or ripped and lead to a loss of containment force and, ultimately, load failure.

So, what’s the bigger payoff?

Saving a few percent on of stretch film or reducing the shipping damage that can result from ineffective stretch wrapping?

Talk about a no-brainer.

Start Now!

Fix the things that really make a difference. And take the first step by reducing your shipping damage through better stretch wrapping. After all, don’t forget that preventing shipping damage is a key reason we stretch wrap in the first place.

You may be interested in these related posts:

*Based on the 2008 Joint Industries Unsalables Report: The Real Causes and Actionable Solutions. Copyright 2008 by the Grocery Manufacturers Association and Deloitte Consulting LLC.

Reduce Shipping Damage by 50% - Download Now

 

This post was published on February 28, 2017 and updated on January 3, 2020.

February 28, 2017

There’s more to be gained by reducing shipping damage caused by poor stretch wrapping than by trying to reduce stretch film cost.